Jerry Chevalier

Here's what they're saying...

02/10/2010 - Brain Cup, Light Rod Kit, Neck Bracket, Light Rod Cam, Crown Shaft, Motor, Motor Plate, Hardware Pack
Part Quality - 5
Value - 5
Delivery Time - 5
Communication - 5
Overall Ranking - 5
Jerry's parts are awesome. Thanks Jerry
Darren F. (Hubba) B9-0565

12/30/2009 - Torso Hooks, Brain Cam, Crown Shaft, Motor Plate, Motor for Crown Shaft, Brain Cup.
Part Quality - 5+
Value - 5
Delivery Time - 5+ extra effort on his part
Communication - 5+
Overall Ranking - 5
When I test fitted the parts the quality and craftsmanship of each part was superior. Jerry managed to get the parts to me with what I believe to be an extra effort on his part. Outstanding job Jerry. Thanks
Dwight B. B9-0559

12/05/2009 - Brain Cup, Finger Lights, Neck Bracket, Motor and Shaft and Cam, Aluminum Ears
Value - 5
Delivery Time - 5
Communication - 5
Overall Ranking - 5
Excellent parts, fast communication, very happy
Mike H. B9-0544

10/24/2009 - Neon Backplate
Value - 5
Delivery Time - 5
Communication - 5
Overall Ranking - 5
Jerry, Always replied to my emails and fast delivery on the parts. THANKS
Bill C. B9-0173

08/15/2009 - Torso Hooks
Value - 5
Delivery Time - 5
Communication - 5
Overall Ranking - 5
David K. B9-0037

04/23/2009 - Neon Backplate & Finger Light Kit
Value - 5
Delivery Time - 5
Communication - 5
Overall Ranking - 5
Jerry's a pleasure to business with. Always replied to my emails and fast delivery on the parts which were very well packed. The neon backplate is a very nice addition to my B9 and the finger lights are absolutely flawless. I would highly recommend him if you are after any of these parts.
Steve B. B9-0102

02/23/2009 - Neck bracket, Brain cup, Cam, Motor and Motor mount
Value - 5
Delivery Time - 5
Communication - 5
Overall Ranking - 5
I just received the neck bracket, brain cup,cam,motor and motor mount from Jerry Chevalier. These parts are excellent. It also came with all the screws,rubber mounts and the light rod hinge wire. The neck bracket was to large for the hole in Fred's bubble bottom plate. I think it was about .030" to large. This was not a problem though, I turned it down in the lathe. One could easily enlarge the hole in the bottom plate also. Jerry is great to deal with, shipping is fast and parts are packed with care. 5+ across the board.
Thanks Jerry,
Tom B. B9-0410

07/28/2008 - Tilting leg section, 4 level CSS unit, Bubble lifter assembly, Diet waist plate, Torso rotation unit and donut support with cam locks
Value - 5
Delivery Time - 5
Communication - 5
Overall Ranking - 5
Jerry and his machinist James have been excellent to deal with and the parts are fantastic, they are quality parts that all fit together perfectly.
Thankyou
Ossi M. B9-0182

07/28/2008 - Button Backer Plate and Donut Support with Cam Locks
Part Quality - 5
Value - 5
Delivery Time - 5
Communication - 5
Overall Ranking - 5
Very happy with the part's and the turn around. I well give a 5 across the board. I will order again.
Thanks,
David K. B9-0037

07/28/2008 - Tilting Leg Section - Tilting Hip Motor Assy. - Torso Rotation Assy. - Teeth Lights Button Backer Plate
Part Quality - 5+
Value - 5+
Delivery Time - 5+
Communication - 5+
Overall Ranking - 5+
Jerry is a reliable and excellent club member. Great service and communications.
Nice products. Great job, Jerry. Thank you so much.
John C. B9-0456